IEC 60793-1-41 Ed. 4.0:2024 RLV (Redline version) (b)
光ファイバ-第1-41部:測定方法及び試験手順-帯域幅
Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
発行年月日:
2024-04-19
状態:
有効
邦訳版:
無
英語 92ページ
79,200 円(税込) 本体価格:72,000円
規格概要 | IEC 60793-1-41:2024 is available as IEC 60793-1-41:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60793-1-41:2024 describes three methods for determining and measuring the modal bandwidth of multimode optical fibres (see IEC 60793-2-10, IEC 60793-2-30, and the IEC 60793 2 40 series). The baseband frequency response is directly measured in the frequency domain by determining the fibre response to a sinusoidaly modulated light source. The baseband response can also be measured by observing the broadening of a narrow pulse of light. The calculated response is determined using differential mode delay (DMD) data. The three methods are: Method A Time domain (pulse distortion) measurement Method B Frequency-domain measurement Method C Overfilled launch modal bandwidth calculated from differential mode delay (OMBc) Method A and method B can be performed using one of two launches: an overfilled launch (OFL) condition or a restricted mode launch (RML) condition. Method C is only defined for A1-OM3 to A1-OM5 multimode fibres and uses a weighted summation of DMD launch responses with the weights corresponding to an overfilled launch condition. The relevant test method and launch condition is chosen according to the type of fibre. NOTE 1 These test methods are commonly used in production and research facilities and are not easily accomplished in the field. NOTE 2 OFL has been used for the modal bandwidth value for LED-based applications for many years. However, no single launch condition is representative of the laser (e.g. VCSEL) sources that are used for gigabit and higher rate transmission. This fact drove the development of IEC 60793-1-49 for determining the effective modal bandwidth of laser optimized 50 m fibres. See IEC 60793-2-10 and I |
---|---|
TC |
TC 86/SC 86A |
ICS |
33.180.10 |
備考 | Redlineについてはこちら |